Contractor Source

Resources> Videos
Resources> Videos

Walttools Accent Release

 

accent release agentWalttools Accent release is a color contrast powder used as a bond breaker in the concrete stamping process. It provides color contrast when using Tru Hue integral color, color hardener and various Tru Tint concrete stain systems. Just broadcast a light coating over the surface to be textured, just before beginning, an also a light coat on the tool.

Resources> Videos
Resources> Videos

How to Stamp Concrete

How to Stamp Concrete - The Complete Guide

Just like a job well done, concrete is built to stand the test of time - and stamped concrete takes this already-superior building material to the next level. If you’ve been curious about adding professional-grade texture or finishes into your concrete project, it’s never been easier with our guide for how to stamp concrete and Walttools concrete products at your fingertips. Our comprehensive line of products is made to be easy to use at every step, including:

  • High-quality concrete stamp sets* that let you instantly mimic anything from the look of reclaimed wood planks to the beauty of natural stone.
  • Seamless concrete stamp skins* that allow you to introduce artistic touches ranging from subtle to transformative.
  • Rich, beautiful concrete coloring products that turn everything from concrete pathways to retaining walls to water features into custom decor.
  • Durable concrete sealing products that keep your finished concrete textures and hues looking new and fresh for years to come.

*Specially formulated to work in tandem with our liquid release product.

CONCRETE INSTALLATION

Prepare and Pour

When starting any DIY stamped concrete project, the first step is to make sure your concrete “canvas” is ready to stamp with your texture of choice.

Measure

Before beginning any permanent step, take a moment to re-measure the boundaries of your project, as well as checking to ensure the finished project will be exactly where you need it to be. Open any doors, windows, or gates that will potentially pass over new concrete structures and gage if they will still do so after your project is completed. This step will prevent unpleasant surprises once the concrete dries.

Install Forms

Place the forms and / or boundaries you’ll be using to define your concrete project area and ensure the bottom edges are embedded or flush, as required. During this step, be sure to mark guides for any future accent placement - this will help achieve consistency and visual balance for your finished product.

Install Concrete Reinforcement

Depending on the overall scope and placement of your stamped concrete project, you may need an inspection at this point. Check with the rules and regulations of your local municipality to determine if one is necessary before proceeding.

Start Pouring

How to stamp concrete: instructions to pour concreteWhen you first begin to pour, be sure to carefully check the viscosity of your concrete mix to make sure it’s where it needs to be. Add water, roughly 5 gallons at a time, to bring the mix to the appropriate level. This approach will ensure the final distribution pattern of your concrete stamp texture will appear both even and professional.

Level with Rail

How to stamp concrete: level the concreteUse a rail to keep the edges and height of your poured concrete consistent; this will also help with even application of your stamped concrete texture.

Float and Trowel

Prior to troweling your concrete, apply Walttools’ Tru Slik as a spray. Not only will this step help you achieve a smoother, easier-to-stamp surface in your concrete, it also:

  • Reduces the effect of surface moisture-evaporating conditions, including direct sunlight, strong winds, low humidity, and more.
  • Contains no harsh solvents or volatile organic compounds / V.O.C., making it safer to use, handle, and clean up during your concrete project.
  • Promotes an easier finish without the stress of critical time placement, which in turn reduces labor costs and overall job costs.

Important note: At this point in the project, take special note of sun and shade conditions, as drying time will affect the consistency of your concrete stamping impressions. This is especially true if your work area has mixed exposure - some shade, some sun, etc. Make note of any differences and their effect on dry time, and adjust accordingly.

Need a recap of the project steps so far? Click here for a video walkthrough on how to prepare and pour your concrete to prep it for concrete stamping or textured skin application.

How to stamp a concrete patio part 1

START STAMPING

Add Custom Texture and Design

Hand Edge Sides and Joint Lines

Examine the borders of your project area and be sure that everything aligns. Once you’ve begun to stamp, you’ll need to follow through without hesitation to ensure the finished design is even and eye-clean. This step should be done as carefully and methodically as your dry time allows.

Select and Prepare Your Seamless Skin

For this example, we’ll be using our quarry stone pattern seamless skin for our project’s border. Like many of our stamped concrete seamless skins, this design is available in variations (heavy and light), as well as a variety of coverage sizes to meet your project needs. Proceed with this easy-to-follow 4-step process:
How to stamp concrete using a seamless skin

  • Step 1: When you’re ready to start, begin by applying our Tru Impression Liquid Release evenly across the desired application surface of the skin(s) being used to create your stamped concrete.
  • Step 2: When using multiple skins for your project, overlap the edges of the seamless skins by approximately 4 to 6 inches to ensure even coverage and consistent impression.
  • Step 3: Tamp down the skins using firm, consistent pressure and appropriate tamping tools, as shown in the video. Avoid walking over skins on the balls of your feet, or tamping at the overlapping edges, as these may cause unwanted impressions in your finished concrete and the seamless effect may be disrupted.
  • Step 4: When your seamless skin has been thoroughly tamped, peel back an edge to check that the impression is properly stamped. If you are satisfied with the results, slowly and gently bend the skin edges up towards you, like a taco, and lift the skin away from the concrete surface before setting it aside.

Select and Prepare Your Concrete Stamp

Using a concrete stamp to stamp concreteMoving on to our interior example, we’ll be using our centennial wood plank concrete stamp, which is available in sets, stamps, and seamless skins for consistency throughout concrete stamping projects of any size. Proceed with this easy-to-follow 4-step process, which mimics the application of our seamless skins:

  • Step 1: Begin by applying a layer of our Tru Impression Liquid Release product evenly across the surface of your concrete stamps.
  • Step 2: Carefully align the edges of your concrete stamps across the entire project area surface, taking care to cover or protect any impressions or stamps already in place.
  • Use stamping tools to stamp concreteStep 3: Use appropriate stamping tools to press the entire surface of the stamp, and use even footfalls - avoiding balancing on your heels or the balls of your feet - as you walk across stamps. Too much pressure can over-emphasize an area of your stamp results, making the effect appear uneven. Work quickly and consistently, towards the sun, for best results.
  • Step 4:How to stamp concrete When your stamp area has been tamped, carefully lift each stamp along an edge without unseating it from its placement. This will allow you to check that the appropriate depth has been achieved. Use attached handles or straps to lift each stamp up vertically, avoiding putting pressure along an edge when separating it from the concrete surface.
  • Step 5:Detailing in how to stamp concrete Use handwork detailing tools, as shown, approximately 1.5 hours after removing stamps from your concrete surface. This will allow you to bring out depth and details where required. Joints and sunken details should appear to be of equal, consistent depth once finished.
  • Step 6:Blow away debris after stamping concrete Blow away any dry or drying debris from detail work and wash down the entire surface with water. This will clean your finished design and wash away any remaining liquid release product.

Need a recap? Here’s a video walkthrough on all the steps you’ll need to apply our concrete stamps and skins to your stamped concrete project.

How to stamp a concrete patio part 2

How to Stamp Concrete: Applying Color & Sealing

Adding Color and Protection

Step 1:

Once your pattern has been stamped and is ready for color, follow the instructions to apply Tru Tique Antique Wash to help accent and highlight the natural details in your pattern of choice.

  • Prime with water - prepping with water will help the wash achieve a better damp-dry finish. Hint: If a naturally-aged look is desired, choose our “Medium Gray” shade for fresh concrete.
  • Mix your Tru Tique color of choice - Use 1 to 3 scoops of our water-based powder mix per gallon to achieve the desired depth of hue, and proceed with your method of choice to apply it to your project surface.

Tru Tique Concrete Color Application Method 1

Once the desired mix of Tru Tique Antique Wash and water has been achieved, simply pour the solution over your project surface and use a push broom to move it freely around and down into detail areas. This method will provide a free-flowing, less structured application of color.

Coloring stamped concrete

Tru Tique Concrete Color Application Method 2

Prepare Tru Tique Antique Wash and water mixture to desired depth of color. Pour solution carefully in regular intervals across your project area, following any major lines or patterns. Use a push broom and a regular “mopping” motion to push the color mixture in regular rows or columns across the work area. Allow the surface to dry and incorporate handwork if you’d like more variation in the finished effect. This method will provide a more even, structured application of color.

How to stamp concrete: applying a concrete color application

How to color freshly stamped concrete

Step 2:

Enhance color further by applying Re-Ax Concrete Stain. In the project showcased in our video, we’re using 1.5 gallons of Re-Ax in two different colors; one for the border, and another for the inside of the project area.

Why Choose Re-Ax?

  • Goes on purple for easy and consistent visual application - no guesswork needed.
  • Can be layered to achieve a variety of different finished looks and color intensities.
  • Fast and easy - helps you finish your concrete coloring project quickly and accurately.
  • Won’t affect sealing agents as some acid-based stains do, ensuring a hassle-free finish.
  • Doesn’t need to be neutralized like acid-based staining products, eliminating extra work.

Re-Ax Concrete Color Application Method 1 (All Over Pattern)

Prepare Re-Ax concrete coloring mix product, using manufacturer instructions, to your desired depth of color. Using a concrete color spraying tool, set your sprayer nozzle or wand to produce a fine mist. Use circular motions to apply product evenly across your concrete project surface. This method will provide a more even, structured application of color.

How to color stamped concrete

Re-Ax Concrete Color Application Method 2 (Linear Pattern)

Prepare Re-Ax concrete coloring mix product, using manufacturer instructions, to your desired depth of color. Using a wide, handled sponge applicator, follow the lines or columns of your stamped concrete surface. This method will ensure fine details and lines will achieve consistent visual highlighting with your color of choice.

Stamped concrete coloring

How to color stamped concrete

Step 3:

Apply D2K Heal and Seal to your finished, colored concrete surface. This will help “lock in” your finish of choice and keep it looking attractive for years to come, even in high traffic areas.

Why Choose D2K?

  • This 2-part silicone sealer offers higher quality results over acrylic-based sealers.
  • Can be cleaned up with simple water, reducing time and effort post-application.
  • Delivers an attractive, durable semi-gloss finish that complements stamped concrete.
  • Doesn’t feel or act slippery once set, making it a smart, safe choice for sealing.
  • Chemically fuses to concrete, avoiding unsightly hazing and peeling over time.
  • Easy application: simply spray in a circular motion and back roll until your surface is covered.

Sealing stamped concrete

How to apply sealer to stamped concrete

Need a refresher on how to stamp concrete and finish up your project? Check out our comprehensive video and follow along, step-by-step, as we bring a stunning patio to vivid life with Walttools’ concrete stamping, coloring, and finishing products.

HOW TO STAMP CONCRETE - PATIO, PART 3

Example of how to stamp concrete with wood look

Creating wood plank with stamped concrete example

How to stamp concrete using custom skins exmaple

When you’re looking to add lasting beauty and durability to your hardscaping project, knowing how to stamp concrete offers a unique solution that’s easy to apply and stands the test of time. Our high-quality concrete stamps are easy to work with and reusable, offering virtually endless project options and the ability to cohesively add to your project, even years later. Walttools is proud to offer concrete stamping and coloration products, accessories, and training to ensure that every concrete project is a masterpiece.

How to Stamp Concrete Overview  

Why stamped concrete? Stamped decorative concrete is an attractive and economical alternative to natural pavers or just plain poured concrete. A stamped concrete patio can give you the look and texture of a stone patio for a lot less money than the real thing; sometimes less than half the cost of the natural material alternatives such as slate

ashler selman

Read More

Top