TI Dust-On Color Hardener

$36.00$45.00

  • Ready-to-use, dust-on color hardener for freshly poured concrete
  • Can be blended to give a mottled effect
  • Easy to apply for interior and exterior
  • Long-lasting & UV resistant
  • Typically used for stamped flatwork applications
  • 60 lb bag
  • Also great for trowelling color into vertical mixes such as Tru Pac X

Colors are: Adobe Brown, Brick Red, Champaign, Charcoal Gray, Dark Walnut, Emerald Green, Green Slate, Mauve, Medium Gray, Mesa Buff, Outback, Sandstone, Terra Cotta, Blue

SKU: CH Category: Tags: , , , , ,

Product Description

applying color hardenerWalttools Dust On Color Hardener often called dry shake, is a broadcast method of coloring for your stamped or regular concrete projects. Color hardeners come as powders that are hand-broadcast onto the freshly placed concrete and then worked into the surface with a float or trowel. They are easy to use and are available in an assortment of colors. They are different than integral color which colors the entire concrete slab, whereas color hardeners pigment just the top layer and tend to be a bit more intense than integral. They are often used in place of integral colors when more control of the final surface color is needed or when it is not practical to use integral color. They are fully compatible with other coloring products such as Walttools accent releaseTru Tique antiquing agent, Tru Tint stains, decorative sealers, etc.

Color hardener is a specialized colored overlay mix consisting of silica, cement, and pigment. The powdered color hardener is broadcast onto the surface, given time to absorb moisture, and is then floated into the concrete. It will actually strengthen the slab surface by making it denser.  This harder surface can improve the longevity against traffic and other environmental factors. For decorative contractors, color hardener provides the benefit of a richer cream top surface which takes texture better than just plain concrete.

Another benefit for color hardener is that there are colors available that are very expensive if choosing integral colors since integral color colors the entire slab and with color hardener, you are only coloring the top 1/8 inch of the surface. More than one color of hardener can also be used to create a more dynamic surface.

The factors to consider when choosing color hardeners for your stamped concrete projects are that (1) it creates a lot of dust (it’s messy), (2) and that if the slab chips deep enough, the plain concrete underneath is exposed. Chips can be corrected by using a pasty mixture of color hardener and water, though.

How much to use?  Plan for about 100 sq feet per 60 lb pail for most colors.  Lighter colors may require extra usage to mask the gray of the concrete.

How to Use Concrete Color Hardener: Place, vibrate and float the concrete surface according to standard ACI recommendations. Cover or protect adjacent surfaces. Do not power float or trowel the surface. Apply dust-on color hardener in two coats, using a dry-shake method of uniformly broadcasting the product onto the surface of the freshly placed concrete. Following the initial floating, when excess moisture is no longer evident, broadcast approximately 2/3 of the dust on color hardener onto the fresh concrete surface. Float the broadcasted material into the surface with a mechanical or manual float after the color hardener achieves a uniform moistened appearance. Do not steel trowel. When the water sheen has again disappeared, broadcast the remaining 1/3 of the color hardener onto the surface at right angles to the initial application. Float the second application as above. Keep a small amount of material to correct areas that have insufficient color depth. After the surface has achieved proper firmness, apply a broomed, scored, textured, or troweled finish. A mechanical troweling machine may be used for final finishing. Do not over trowel. Avoid using plastic sheeting, membrane paper, or moist curing methods. After seven days, seal with your favorite Walttools Stampsheen sealer.

prop 65 - silica - sm.jpg

See Color Card  See Data Sheet

Specifications

Weight 60 lbs
Dimensions 13 × 13 × 8 in
Color

, , , , , , , , , , , , ,

You may also like…

FAQS

How much coverage does a 60lb bag typically cover?
Generally, 60 pounds will cover 100 ft.².

Galleries

No Galleries for this product.

Reviews

There are no reviews yet.

Be the first to review “TI Dust-On Color Hardener”