1-888-263-5895

Tru Pac X Mortar Convert kit TI-TPX

trupacx_log_stampingwet_n_wild_3_tru_pac_xfile_nov_23_1_28_55_pmbingold9bumper_boat_island_mud_in_progress_3carving_horsewalkway_waterfall
$13.50 each Weight: 16 lb
Width: 8 in
Length: 8 in
Height: 8 in
Brand: Walttools Walttools

 

The most popular vertical mix in the marketplace

Tru Pac X is a high performance vertical concrete product that will allow you great versatility in your decorative needs.  Unlike other vertical mixes that are unreliable when used for thin applications(under 1/2 inch), Tru Pac X is designed for that challenge.  The useable application thickness can range from under 1/4 inch(see pic) up to 5 inches on a properly prepared surface.  Now you can have one mix that can handle heavy stones carving down to plaster coat treatments.
By combining one Tru-Pac X decorative mortar conversion kit with one 80lb bag of bagged Type S mortar mix found in home improvement stores everywhere, you get a 100lb batch of mix for the same cost or less as typical 50 bag mixes.

Why is Tru Pac X so popular?  Easy.  Tru Pac X is the strongest mix providing the most range of uses AND is the most economical.  Tru Pac popularity has resulted in other manufacturers being forced to release their own ad pacs to complete but always falling short.

Tru Pac X has found its way on the vertical surfaces all over the world and is your go to solution for reliable vertical carving mixes. From amusement parks like Disney and Universal Studios to a countertop in your neighbors backyard, TPX is the best choice.

CALL WHEN ORDERING 15 BAGS OR MORE AS OFTEN TIMES FREIGHT WILL BE A MORE ECONOMICAL OPTION.

  • Mix can be stamped almost immediately after smoothed onto the surface. 
  • Extended set times allow significant carving time for full detail effects.
  • Mix design allows for buildouts of up to 4 inches in strategic places with appropriate scratch coat.
  • Can be used as a thin plaster coat for old world looks.(Use a very mild scratch coat if to be under a thin plaster coat)
  • Drys to a realistic buff gray.  
  • Tenacious binding to standard mortar scratch coat. 
  • Coverage approximately 12 sq ft at 1.5 inches.
  • Bag of mix is 16 lbs.
  • TRU PAC X IS A CEMENT MIX BUT IS NOT TO BE USED ALONE, IT MUST BE USED WITH THE SPECIFIED TYPE S MORTAR MIX - OFTEN CALLED MASONS MIX AND YES IT HAS SAND IN IT.
  • DO NOT GET TYPE S CEMENT, DO NOT GET TYPE S PORTLAND.
Product Reviews:
No reviews have been posted yet. If you have purchased this product please log in to write a review.

Sign Up For Contractor Source Info and Specials

Contact Us

Contractor Source, LLC
1246 Leah Rd
Morris, IL 60450
Tel : 1-888-263-5895

Follow Us

Back To Top