Tru Tique Antique Color Wash

(4 customer reviews)

$28.00

Walttools Tru Tique is a water-based, antiquing, color wash solution designed to provide the natural, two-toned mottled effect that’s normally obtained by the use of colored release agents. Tru Tique is perfect for coloring new surfaces and rejuvenating existing textured surfaces that have faded over time.

  • Same color effects as powder release agent without the mess
  • Same color pallet as current release agents for consistent results
  • 1,500-3,000 square feet per bucket based on blend strength
  • Very easy to apply

Colors are: Adobe Brown, Champaign, Charcoal grey, Coffee brown, copper earth, Dark Walnut, Desert dust, Emerald Green, Graphite, Green Slate, Light Gray_Natural, Mauve, Medium Brown, Medium Gray, Mesa Buff, Pecan Brown, Red Brick, Sandstone, Terra Cotta, Blue

Product Description

tru tique applicationAntiquing agent, or color wash, is applied to stamped or textured concrete surfaces that are unsealed to provide a secondary color to the surface that mimics traditional antique release agents. This will provide a great deal of enhancement on textured surfaces. These pigments tend to enhance grout lines and stamped impressions with less emphasis on the base color of the higher points of the texture. Tru Tique Antiquing Agent will work with concrete, overpayment, and micro toppings. Walttools Tru Tique Color Wash is water-based and very easy to use. Tru Tique is also the best choice for rejuvenating existing textured surfaces that have faded over time.  When all older sealer is removed, you apply according to the instructions, let it dry and you can then reseal the surface with your chosen Walttools sealer product such as Heal and Seal Deco 2k and your surface is as good as new.

How to use Tru Tique Concrete Antiquing Agent is quite simple:

Thoroughly clean the concrete surface before applying Tru Tique. Any existing sealer must be removed if being used on older concrete surfaces. The surface should be free from all sealers, dirt, oil, paint, moss, dust, and other contaminants. Though etching is usually not necessary, bear in mind that the preferred surface is similar to that when applying a concrete sealer. We recommend dampening the surface before you apply the Tru Tique, especially in hotter weather since the hot concrete surface will absorb and dry the material quickly. Pour one gallon of clean water into a 5-gallon pail, add 1, 2, or 3 scoops (up to 6 ounces) of Tru Tique powder to the water and mix briskly, making sure all powder is dissolved in the bucket. The more mix you add, the more intense the pigment. Add the mix to a pump sprayer that has a large tip opening and apply evenly over the entire surface. If you do not have a sprayer with an adequate tip you may also use something as simple as a garden watering can. You will need to continuously shake the sprayer to minimize the settling of the mixture. A large push broom is often used to help move the product uniformly over the surface. If no broom is available and heavy puddles occur, you can remove the excess with a wet sponge. Once it dries and you see what you have, re-wetting and brushing with a broom can be used to remove material from high spots thereby increasing the contrast of the surface. Once complete allow the Tru Tique wash to dry for 12-24 hours and seal with your favorite Walttools Sealer.

prop 65 - silica - sm.jpg

See Color Card  See Data Sheet

You may also like…

FAQS

Tru Tique Antique Color Wash be used on a patio that was colored using charcoal release agent?
Sure, as long as it is not already sealed. This needs to be applied to clean, unsealed concrete. If this is for an old slate to rejuvenate, you just make sure the old sealer is gone.
Tru Tique Antique Color Wash be used over a white latex semi gloss paint to give an antiquing effect?
In a word, yes. We have a contractor that does faux stone and he puts a light coat of latex paint over the stonework then proceeds to use the Tru Tint to create his effects
Tru Tique Antique Color Wash comes in how many pounds?
In 3 pounds.

4 reviews for Tru Tique Antique Color Wash

  1. D. Belknap

    Watched a YouTube video on the application, which looked simple, so I bought a bucket of the powder. I went with Charcoal color since it was what we had originally and had faded, even with deck sealer applied often. Mixes with water and is applied with a sprayer or gardening water can. Use the water can as it prevents splashing and covers more area quicker. Dried and sealed with a good quality sealer. Next time will add the main coat and then do a second sans stone color on top, as they did in the video, to give it even more character.

  2. Tom Howard

    This product is easy to use and works well as long as you follow the directions. Filled the cracks and the color blended well with my patio so the cracks are barely noticeable now. Have not resealed the patio yet, will have to see how it looks afterward.

  3. Chris Robbins (verified owner)

    Love these antique washes from Walttools! Awesome products and if what you want is in stock, it gets shipped out double quick! These people are A+

  4. Chris Robbins (verified owner)

    I made a purchase on the 26th and somehow, they got it to me the next day! Amazon has some competition! Thanks again!

Add a review